carbon steel tube
"
Ενωμένος στενά en10305-2 τραβηγμένους στο κρύο σωλήνες Q345 χάλυβα άνθρακα για την αυτόματη ψύξη
Welded Cold Drawn Carbon Steel Tubes EN10305-2 For Auto Refrigeration Material The material used for the welded cold drawn carbon steel tubes conforming to EN10305-2 for auto refrigeration is carbon steel. Specification The specification for the welded cold drawn carbon steel tubes EN10305-2 for auto refrigeration is as follows: Standard: EN10305-2 Type: Welded Shape: Round Size Range: Customizable Length: Customizable Chemical Composition The chemical composition of the
Η ενωμένη στενά J356 λάμψη της SAE έλεγξε τη σωλήνωση 15.88mm OD χάλυβα χαμηλού άνθρακα
15.88 mm OD X 1.24 mm Type -A J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading This SAE Standard covers normalized electric-resistance welded flash-controlled single-wall low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, beading, and brazing. Material produced to this specification is not intended to be used for
Ενωμένος στενά σωλήνας χάλυβα άνθρακα ASTM A334 Gr1 Gr6 Torich
ASTM A334 Gr1 Gr6 Welded Carbon Steel Tube Sope: 1 This specification covers several grades of minimum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties. 2 Supplementary Requirement S1 of an optional nature is provided. This shall apply only when specified by the
Γαλβανισμένο Erw γύρω από το σωλήνα OD 21mm χάλυβα άνθρακα
Round Pipe Tube Carbon Steel Tube Gi Galvanized Steel Pipe Hot dip galvanized pipe: It is to make the molten metal react with the iron matrix to produce an alloy layer, so as to combine the matrix and the coating. Hot dip galvanizing is to pickle the steel pipe first. In order to remove iron oxide on the surface of the steel pipe, after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or ammonium chloride and zinc chloride mixed aqueous solution
Υδραυλικός τραβηγμένος στο κρύο σωλήνας χάλυβα άνθρακα Q345 OD 250mm
Cold Drawn Precision Round Carbon Steel Tube Mechanics performance: Material Tensile strength Yield strength Elongation Hardness CK20/20#/AISI1020 >520 N/ mm2 >375 N/mm2 >15% >85HB CK45/45#/AISI1045 >600 N/ mm2 >520 N/ mm2 >15% >85HB ST52/16Mn/Q345D >600 N/ mm2 >520 N/ mm2 >15% >85HB 25Mn/STKM 13C-T >600 N/ mm2 >530 N/ mm2 >15% >85HB Variety : Processing Cylinder Diameter Straightness Size Accuracy W.T/mm Inner Bore Roughess Cold drawn/cold rolled
άνευ ραφής σωλήνωση χάλυβα χαμηλού άνθρακα πάχους τοίχων 15mm J524 που ανοπτείται για την κάμψη/την καύση
J524 Seamless Low Carbon Steel Tubing Annealed for Bending and Flaring Size range: O.D.:6-88.9mm W.T.:1-15mm L: According to customer Order Table 1- TUBING OUTSIDE DIAMATER TOLERANCE Nominal Tubing OD mm Tolerance ±mm Up to 25.4 0.10 Over 25.4 to 38.1 inclusive 0.15 Over 38.1 to 50.8 inclusive 0.20 Over 50.8 to 88.9 inclusive 0.25 WT tolerance shall be not more than 10% Table 2- CHEMICAL REQUIREMENTS Element % Carbon 0.18 max Manganese 0.30 to 0.60 Phosphpris 0.040 max Sulfur
Άνευ ραφής τραβηγμένος στο κρύο σωλήνας ASTM A53 χάλυβα άνθρακα για την ψύξη κλιματισμού
Cold Drawn Carbon Steel Seamless Steel Tubes ASTM A53 For Air Conditioning Refrigeration Material The material used for the production of cold drawn carbon steel seamless steel tubes, conforming to the ASTM A53 standard, is carbon steel. Specification The specification of the cold drawn carbon steel seamless steel tubes, according to ASTM A53, is as follows: Specification Value Standard ASTM A53 Type Seamless Size Range NPS 1/8" - 26" Wall Thickness SCH 40, SCH 80, SCH 160
Καυτός - κυλημένος σωλήνας χάλυβα άνθρακα 35crmo4 άνευ ραφής/βαρύς σωλήνας σωλήνων χάλυβα τοίχων
Descriptions of Carbon Welded/Seamless Steel Pipe Product Name Hot Rolled Carbon 35crmo4 Seamless heavy wall Steel Pipe tube Standard ASTM A106, ASTM A53, API 5L Gr.B, DIN17175,DIN1629 Outer Dia: 10mm-1500mm Wall Thickness 2mm-70mm Dia Tolerance Control with in the standard, OD:+-1%, WT:+-10% Materials 10#,20#, 45#,16Mn,A106(B,C),A53(A,B),API J55,API K55,Q235,Q345,ST35.8,ST37,ST42,ST45,ST52 Inspection ISO,BV,SGS,MTC Packing Waterproof paper, and steel strip packed. Standard
Στρογγυλός βαρύς τοίχος 1008 μορφής άνευ ραφής σωλήνας χάλυβα άνθρακα
ASTM A519 Round Shape heavy Wall Seamless Steel Pipe 1. ASTM A519 Standard Scope: 1.1 This specifification covers several grades of carbon and alloy steel seamless mechanical tubing. The grades are listed in Tables 1-3. When welding is used for joining the weldable mechanical tube grades, the welding procedure shall be suitable for the grade, the condition of the components, and the intended service. 1.2 This specifification covers both seamless hot-fifinished mechanical
