cold drawn tubes
"
Σωλήνες από ανθρακοχάλυβα χωρίς ραφή ψυχρής έλξης JIS G3460 για σέρβις σε χαμηλές θερμοκρασίες
Cold Drawn Seamless Carbon Steel Pipes JIS G3460 For Low Temperature Service Material and Specification The Cold Drawn Seamless Carbon Steel Pipes discussed in this article conform to the Japanese Industrial Standard (JIS) G3460. These pipes are specifically designed to be used for low-temperature services, making them suitable for various applications in industries where operating temperatures are relatively low. Chemical Composition Element Chemical Composition (%) Carbon
1.4462 τραβηγμένος στο κρύο άνευ ραφής σωλήνας ανοξείδωτου S31803
Torich 1.4462/S31803/2205 Duplex Stainless Steel Seamless Pipe Type: Stainless, seamless Grade: TP304,TP304L, TP316,TP316L, TP321 1.4301 Technical: Cold Drawn,Cold Rolled Usage: Petroleum&Chemical industry Size: OD: 6.25-254mm WT: 0.5-12mm QUALITY CONTROL: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing and Cold Rolling, on line inspection 5. Heat Treatment, +A, +SRA, +LC
Άνευ ραφής σωλήνες λεβήτων χάλυβα άνθρακα ASTM A556 τραβηγμένοι στο κρύο
ASTM A556 Seamless Cold Drawn Carbon Steel Tube Boiler Tube for Tubular Feed Water Heaters Scope This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes,if specified,for use in tubular feed water heaters. Size : from 5/8 to 1 1/4-in 15.9-31.8mm Outerside diameter,inclusive,with minimum wall thickness equal to or greater than 0.045inch (1.1mm) Order Information: OD: 5/8’’- 1 1/4” (15.9-31.8mm) WT: ≥ 0
Τραβηγμένος στο κρύο σωλήνας GCr15 100Cr6 χάλυβα OSmooth Roughnes χωρίς συγκόλληση
GCr15 100Cr6 OD85XWT11.5 Seamless Steel Tube Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0.45-0.75 1.40-1.70 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMo7 0.93-1.05 0.15-0.45 0.25-0.45 ≤0.025 ≤0.015 1.65-1.95 0.15-0.30 Delivery
EN10305-4 E235 Ανοξείδωτος σωλήνας υδραυλικών συστημάτων από ανθρακούχο χάλυβα
EN10305-4 E235 +N Carbon Steel Seamless Precision Hydraulic Tube,6*1.0,8*1.5,10*1.5,16*1.5,25*3.0 1. Standard: EN10305-4 Cold drawn Precision Seamless Steel Pipes 2. Steel Grade: E215,E235,E355, other materials upon agreement with customers. 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance, with certain heat treatment to achieve better mechanical properties for bending and pressure purposes 4. Size range: O.D.:5
Προσαρμοσμένο GOST 9567-75 Χρυσοσύρματα δομικά άνθρακα αδιάβροχο σωλήνα για τη μεταφορά αγωγών
Customized GOST 9567-75 Cold Drawn Structural Carbon Seamless Pipe For Pipeline Transport Material Specification The GOST 9567-75 standard defines the requirements for cold-drawn structural carbon seamless pipes that are used for pipeline transport. These pipes are widely used in various industries where high-quality pipes are required to ensure the efficient transportation of fluids or gases. Key Features Seamless design: The pipes are manufactured using a seamless process,
Φωτεινή ανοπτημένη τραβηγμένη στο κρύο τριχοειδής σωλήνωση σωλήνων ανοξείδωτου 304 για ιατρικό
304 Stainless Steel Capillary Tubing TORICH is a professional steel tubes supplier from China with over 23 years experience. We have NICE quality of Capillary Tubing,have exported 304 stainless steel capillary to India,UAE,Australia,Poland,etc Standard: Steel grade: Size: OD 0.28-10mm WT 0.08-1mm Production Process: Cold Drawn Bright Anneal etc Type : Seamless,welded Surface: Pickling, Bright 201 202 304 316 S31803 S32750 Chemical Composition(%) C ≤0.15 ≤0.15 ≤0.08 ≤0.08 ≤0
Τραβηγμένος στο κρύο παχύς σωλήνας en10216-1 ανοξείδωτου τοίχων άνευ ραφής για λόγους πίεσης
Seamless Stainless Steel Tube Cold Drawn Thick Wall Steel Tube EN10216-1 For Pressure Purposes Material The seamless stainless steel tube discussed in this article is made of high-quality stainless steel. Specification The tube conforms to the specification EN10216-1, which is specifically designed for pressure purposes. It ensures the tube's suitability for applications requiring high-pressure resistance. Chemical Composition The chemical composition of the seamless
Ο στρογγυλός ενωμένος στενά χάλυβας της SAE J525 ανόπτησε τον τραβηγμένο στο κρύο σωλήνα για τα μέρη αυτοκινήτου
SAE J525 Welded Cold Drawn Low Carbon Steel Tubing Annealed for Bending and Flaring Applications: for Bending and Flaring to Auto Parts Quick Detail: Size range: O.D.:6-350mm W.T.:1-15mm L: According to customer Order Grade: Low Carbon Steel Manufacture and Production: ERW+ DOM The tubing is made from flat-rolled steel shaped into a tubular form, the edges of which are joined and fused together by electric-resistance welding. After forming and welding, the tubing shall be
