low carbon steel pipe
"
Sa192 λαδωμένη σωλήνες επιφάνεια χάλυβα νημάτων ανταλλακτών θερμότητας σωλήνων χάλυβα άνθρακα άνευ ραφής
SA192 Seamless Carbon Tubes for Boilers and Heat-Exchangers Thread Steel Pipes Applications: Seamless Carbon Boiler Tubes Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Steel Grade and Chemical Compositions: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical Properties Tensil Streghth: min ksi[Mpa] 47[325] Yield Point: min ksi[Mpa] 26[180] Elongation: ≥35% Package: 1) Bundle 2) In Bulk 3) Bags 4) As Clients' Requirements
Αυτόματος χωρίς συγκόλληση σωλήνας Torich DIN 2391 St37 χάλυβα άνθρακα ανοίξεων αερίου υψηλής αντοχής
gas spring precision seamless steel pipe DIN2391 Carbon Seamless Steel Pipe Tube German Standard: Chemical Composition Standard Steel Grade C(%) Si(%) Mn(%) S(%) P(%) DIN 2391 St35 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St37 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St37.4 ≤0.17 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St45 ≤0.21 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St44 ≤0.21 ≤0.35 ≥0.40 ≤0.025 ≤0.025 St52 ≤0.22 ≤0.35 ≥1.60 ≤0.025 ≤0.025 Mechanical Property: Standard Steel Grade Mechanical Performance GBK(+A) NBK(+N)
Άνευ ραφής σωλήνες λεβήτων χάλυβα άνθρακα ASTM A556 τραβηγμένοι στο κρύο
ASTM A556 Seamless Cold Drawn Carbon Steel Tube Boiler Tube for Tubular Feed Water Heaters Scope This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the form of U-tubes,if specified,for use in tubular feed water heaters. Size : from 5/8 to 1 1/4-in 15.9-31.8mm Outerside diameter,inclusive,with minimum wall thickness equal to or greater than 0.045inch (1.1mm) Order Information: OD: 5/8’’- 1 1/4” (15.9-31.8mm) WT: ≥ 0
EN 10224 L235 Σωλήνες από μη κραματοποιημένο χάλυβα ERW Ζυγισμένοι σωλήνες από κραματοποιημένο χάλυβα για τη μεταφορά υγρών
EN 10224 L235 L275 L355A Non-Alloy Steel Tubes ERW Galvanized Alloy Steel Pipe for Liquid Transport Introduction EN 10224 is a European standard that specifies the requirements for non-alloy steel tubes, particularly for use in liquid transport. These tubes are produced using the Electric Resistance Welding (ERW) method and are often galvanized to enhance their corrosion resistance. This article will delve into the material specifications, key features, chemical composition,
Τύπος χάλυβα άνθρακα DOM για μηχανήματα ακριβείας 30-425 mm OD
Dom Round Tubing Welded Carbon Round Steel Tube for Precision Machinery Material Overview Dom Round Tubing—commonly referred to as DOM (Drawn Over Mandrel)—is produced from electric-resistance-welded (ERW) steel (typically AISI 1020, 1026, or equivalent). It undergoes cold drawing over a mandrel to remove weld flash, enhancing dimensional accuracy, concentricity, strength, and surface quality. It is widely used in precision machinery due to these enhanced characteristics.
16MnDG 10MnDG 09DG GB/T 18984 διοχέτευση με σωλήνες υπηρεσιών χαμηλής θερμοκρασίας σωλήνων ανταλλακτών θερμότητας χάλυβα άνθρακα
GB/T 18984 Seamless Steel Tubes for Low-Temperature Service Piping Spec: Material:16MnDG , 10MnDG , 09DG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12m Tolerance: According to the following tables or customers’ request. Permissible deviation tolerance of OD and WT Classfication Steel size Permissible tolerance W-H OD ＜351 ±1.0%D ≥351 ±1.25%D WT ≤25 ±12.5%S W-C OD ≤30 ±0.20 ＞30~50 ±0.30 ＞50 ±0.75%D WT ≤3 ＋12.5%S -10%S ＞3 ±10%S Steel grade and chemical composition
Σωλήνες ανταλλακτών θερμότητας χάλυβα άνθρακα ASTM A178 γύρω από ενωμένοι στενά
ASTM A178 Round Welded Carbon Steel Heat Exchanger Tubes Material: Carbon steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirement Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and e ends Heat treatment: After welding, all tubes are heat treated at a temperature of 1650℉ (900℃) or higher and followed by cooling in air or
ASTM A500 ένωσε στενά το άνευ ραφής άνθρακα κρύο μορφής χάλυβα ειδικό που διαμορφώθηκε για τη δομή
ASTM A500 Cold-Formed Welded and Seamless Carbon Steel Special Shape Tubing for Structure Seamless and Welded Square Steel Tubes Carbon Steel ST37.0,ST44.0, Q235,Q345, SAE1010,SAE1020,SAE1045 Seamless and welded Square steel tubes for application of Structure and scaffolding use Production method: Seamless Cold Drawing ERW Welding Size range: Square tubes O.D. :20-20 to 500-500mm W.T.:1-24mm L:max12000mm Rectangle tubes O.D. :20-30 to 400-600mm W.T.:1-24mm L:max12000mm
Sa192 άνευ ραφής σωλήνας χάλυβα για τους σωλήνες χάλυβα νημάτων λεβήτων και ανταλλακτών θερμότητας
SA192 Seamless Carbon Tubes for Boilers and Heat-Exchangers Thread Steel Pipes Applications: Seamless Carbon Boiler Tubes Size range: O.D.:5-420mm W.T.:0.5-50mm L: according to customer's requirement (Max12m) Steel Grade and Chemical Compositions: C 0.06-0.18 Mn 0.27-0.63 P ≤0.035 S ≤0.035 Si ≤0.25 Mechanical Properties Tensil Streghth: min ksi[Mpa] 47[325] Yield Point: min ksi[Mpa] 26[180] Elongation: ≥35% Package: 1) Bundle 2) In Bulk 3) Bags 4) As Clients' Requirements
