low carbon steel pipe
"
Σωλήνας Ακριβείας από Χάλυβα Μαγγανίου χωρίς ραφή για Μηχανική Διάτρησης με Τεχνική Ψυχρής Έλξης
Manganese Steel Pipe – Carbon Steel Precision Seamless Pipe for Drilling Engineering Material This product is a carbon–manganese (C–Mn) steel precision seamless pipe designed for drilling and harsh field operations. Compared with plain carbon steel, controlled manganese content improves strength, hardenability, and impact toughness, making the tube body more reliable under cyclic load, vibration, and abrasive media commonly found in drilling engineering. Typical grade options
Χαμηλή ενωμένη στενά άνθρακας σωλήνωση μετάλλων DOM της SAE σωλήνων χάλυβα DOM J525 για τα μέρη αυτοκινήτου
SAE J525 Welded Cold Draw Low Carbon Steel Tubing annealed for bending and flaring Size range: O.D.:6-88.9mm W.T.:1-15mm L: According to customer Order Applications: for Bending and Flaring to auto part Table 1- TUBING OUTSIDE DIAMETER TOLERANCE Nominal Tubing OD mm Tolerance OD ±mm Tolerance ID ±mm Up to 9.50 0.05 0.05 Over 9.50 to 15.88 inclusive 0.06 0.06 Over 15.88 to 50.80 inclusive 0.08 0.08 Over 50.8 to 63.50 inclusive 0.10 0.10 Over 63.50 to 76.20 inclusive 0.13 0.13
GM123M ενωμένη στενά GM124M χάλυβα σωλήνων διπλοτειχισμένη φρένων αντίσταση διάβρωσης σωλήνων άριστη
TORICH GM123M GM124M Galvanized Double Wall Bundy Tube With Zinc Coating For Automobile Brake 1. Standard GM123M, GM124M, TS7600G, GB 11258-89 2. Steel Grade/Steel Material/Steel Number: Low carbon steel, such as SPCC BLD BLC 3. Raw Material: Cold rolled low carbon steel strip 4. Characteristic: Good Surface Quality, Uniform coating No coating burr Stable quality Excellent corrosion resistance TORICH QUALITY ASSURANCE 5. Application: Brake tube on automobile 6. Specifications
Χαμηλοί σωλήνες χάλυβα άνθρακα JASO M101 TSW αυτοκίνητοι
Poly-Armour PVF Steel Brake/Fuel/Transmission Line Tubing Coil automotive steel pipe Automotive steel tubes Flattening&Bending Test DW No crack SW Not mentioned. Tolerance : Outside Dia: Nominal +/-0.1mm Wall thickness: Nominal +/-0.1mm Appearance : No harmful defect Automotive steel tubes material: Chemical Composition: C Mn P S 0.12Max 0.50Max 0.04Max 0.045Max Mechanical properties T.S. Y.P. E.L HR30T 30kg/mm2min 18kg/mm2min 25%min 65Max Corrosion Resistance (Hours) Zn8μm
GB/T 18984 Χάλυβα Χάλυβα Χάλυβα Χάλυβα Χάλυβα Χάλυβα Χάλυβα Χάλυβα Χάλυβα
GB/T 18984 Hot Rolled Seamless Steel Tubes For Low Temperature Service Piping Material The material used for hot rolled seamless steel tubes for low temperature service piping, as specified by GB/T 18984, is a type of carbon steel. Specification The specification for hot rolled seamless steel tubes for low temperature service piping, as determined by GB/T 18984, outlines the requirements for the dimensions, tolerances, and technical conditions for these tubes. It provides
GB/T 18984 Χάλυβες σωλήνες χωρίς συγκόλληση με συντηρητικό που σχηματίζονται με ψυχρή έλξη για σωλήνες χαμηλής θερμοκρασίας
GB/T 18984 Cold Drawn Preservative Seamless Steel Tubes For Low-Temperature-Service Piping Material and Specification The GB/T 18984 standard pertains to cold-drawn preservative seamless steel tubes designed for low-temperature-service piping. These tubes are specifically formulated to handle the challenges presented by low-temperature environments, ensuring maximum performance and reliability. The material used in the production of these seamless steel tubes is of superior
Ενιαίοι ενωμένοι στενά σωλήνες χάλυβα ακρίβειας TORICH GB/T24187 BHG1 στο συμπυκνωτή
TORICH GB/T24187 BHG1 Precision Single Welded Steel Tubes In Condenser Spec: Material:C Si Mn P S Size Range:OD:3.18-18mm WT:0.5-1.2mm General Length:1-200m Tolerance: According to the following tables or customers’ request. Table 1 Outer diameter, wall thickness and theoretical weight OD/mm WT/mm 0.30 0.40 0.50 0.60 0.65 0.70 0.80 0.90 1.00 1.30 theoretical weight /(kg/m) 3.18 0.0213 0.0274 0.0330 4.00 0.0274 0.0355 0.0432 0.0503 4.76 0.0330 0.0430 0.0525 0.0616 0.0659 0
JIS G3429 STH11 Κρυά ελκυστήρες κούφους αδιάβροχων σωλήνων από χάλυβα για φιάλες αερίου υψηλής πίεσης
JIS G3429 STH11 Cold Drawn Hollow Seamless Steel Tubes For High Pressure Gas Cylinder Introduction JIS G3429 STH11 is a Japanese Industrial Standard (JIS) that specifies the requirements for cold drawn hollow seamless steel tubes used in high-pressure gas cylinders. These tubes are designed to provide superior strength and durability, making them suitable for critical applications in industries such as transportation, oil and gas, and energy. Material and Specification JIS
Ατσάλινος σωλήνας μονής συγκόλλησης ακριβείας
Products Description TORICH GB/T24187 BHG1 Precision Single Welded Carbon Steel Coil Tubes for Condenser Standard GB/T24187 Material Q195 Q215 Q235 Q295 Q345 Size WT: 0.5-1.2mm; OD: 3.18-18mm; Length: 1-200m Processing W-H W-C Sureface Bright ,Copper Plated, Galvanized Or Customers'requirements Applications Condenser, evaporator, cooler tube fuel pipe of refrigeration,automobile and electric appliance industrial Test Tension Test, Flaring Test, Flange Test, Reverse Test,
