nickel alloy pipe
"
Γυαλισμένος σωλήνας κραμάτων νικελίου ASTM B168 για τον ανταλλάκτη θερμότητας
ASTM B168 Nickel Alloy Tube for Heat Exchanger Application: 1) Evaporation tank, acid and alkali industrial machine in petrochemical production, catalytic regenerator,heat exchanger. 2) The production and use of corrosive alkali metals, especially in environments where sulfides are used, 3) Jet engine components, supplemental components of turbojet engines, etc. Inconel 600 alloy is ni - cr - iron base alloy solid solution strengthening, has good resistance to high temperatur
Άνευ ραφής σωλήνας κραμάτων νικελίου ανταλλακτών θερμότητας ASME SB622
ASTM SB622 Nickel Alloy Tube for Heat Exchanger Application: 1) Evaporation tank, acid and alkali industrial machine in petrochemical production, catalytic regenerator,heat exchanger. 2) The production and use of corrosive alkali metals, especially in environments where sulfides are used, 3) Jet engine components, supplemental components of turbojet engines, etc. Inconel 600 alloy is ni - cr - iron base alloy solid solution strengthening, has good resistance to high
Άνευ ραφής σωλήνας χάλυβα κραμάτων νικελίου ASME SB163 UNS N08825 για τη χημική βιομηχανία
ASME SB163 UNS N08825 Nickel Alloy Seamless Steel Tube for chemical industry Type: Nickel alloy steel pipes Application: Chemical process industry, acid production, pickling equipment, pollution control equipment. Technique: Cold-finished, hot-finished Size: OD 5-420mm WT 0.5-50mm LENGTH max12000mm Product Description Chemical Composition: C Si Mn P S Ni Cr Fe Mo Cu Al Ti Min ― ― ― ― ― 38.0 19.5 22.0 2.5 1.5 ― 0.6 Max 0.05 0.5 1.0 ― 0.03 46.0 23.5 ― 3.5 3.0 0.2 1.2 Physical
JIS Γ 3460 στρογγυλός σωλήνας χάλυβα άνθρακα και νικελίου για την υπηρεσία χαμηλής θερμοκρασίας
Torich International Co.,Ltd is specialized in manufacturing and suppying JIS G 3460 Carbon and Nickel Steel Pipe for low temperature service JIS G 3460 Steel Tube Size range: OD: 5-420mm WT: 0.5-50mm Length: Upon request JIS G 3460 Nickel Steel Pipe Application: for low temperature service JIS G 3460 Nickel Steel Tube Shipment: FCL, LCL workable. Bulk Vessel workable By Air, By Sea, by Courier CHEMICAL COMPOSITION % max Steel grade C Si Mn P S Ni STPL 380 0.25 0.35 1.35 0
Incoloy 800 σωλήνας/σωλήνας χάλυβα κραμάτων νικελίου 800H 800HT
NICKEL ALLOY STEEL INCOLOY 800 INCOLOY 800H INCOLOY 800HT TUBE / PIPE Incoloy 800/800H/HT is a kind of austenitic superalloy which is widely used in high temperature pressure-bearing structural parts. Incoloy 800/800H/HT has good corrosion resistance to nitric acid and organic acid, and it also has good corrosion resistance in the mixture of water, vapor, steam, air and carbon dioxide Technique Hot Rolled and Cold Rolled Type Plate,Coil,Strip Thickness Hot rolled:0.3mm to 3mm
ASTM B829 Μονέλ 400 Νικελικά κράματα Χωρίς Σύνδεση σωλήνα για γενικές απαιτήσεις
ASTM B829 Monel 400 Incoloy 625 Nickel Alloy Pipe: Nickel Alloys Seamless Pipe for General Requirements Material Specification ASTM B829 is a standard specification for nickel alloys, specifically focusing on seamless pipes. This specification covers Monel 400 and Incoloy 625, which are renowned for their excellent corrosion resistance and mechanical properties. These alloys are commonly used in industries where high performance and durability are required. Key Features
Σωλήνας κραμάτων νικελίου OD127mm UNS N06601
NAS 601 UNS N06601 Nickel Alloy Tubes Inconel 601 nickel alloy pipe Inconel 601 seamless pipe Inconel 601 pipe Introduction to Inconel 601: Inconel 601, an alloy material. At high temperature, it has excellent oxidation resistance, good carbonization resistance and good oxidation resistance to sulfur It has good mechanical properties at room temperature and high temperature, and has good resistance to stress corrosion cracking due to the control of carbon content and grain
Άνευ ραφής σωλήνας κραμάτων νικελίου ASTM B161, εργασμένος κρύο σωλήνας ανοξείδωτου
ASTM B161 Nickel Seamless Pipe and Tubes for Heat Exchangers and Condensors Small-Diameter and Light-Wall Tube Applications: Steel tubes for Heat Exchangers and Condensors Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0
Astm B423 Incoloy 825 χωρίς συγκόλληση σωλήνας κραμάτων νικελίου Uns N08825
ASTM B423 INCOLOY 825 UNS N08825 NICKEL ALLOY SEAMLESS PIPE / TUBE Incoloy 800H/HT with close control of the carbon, aluminium and titanium contents combined with the high temperature anneal, 800H/AT has significantly higher creep-stress rupture strength than 800. Its higher nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High chromium content made it better resistance to pitting and crevice corrosion cracking
