precision pipes and tubes
"
Τραβηγμένος στο κρύο σωλήνας GCr15 100Cr6 χάλυβα OSmooth Roughnes χωρίς συγκόλληση
GCr15 100Cr6 OD85XWT11.5 Seamless Steel Tube Steel Grade/Steel Material: Steel Grade mass fraction % C Si Mn P S Cr Mo GCr15 0.95-1.05 0.15-0.35 0.20-0.40 ≤0.027 ≤0.020 1.30-1.65 ≤0.10 100Cr6 0.93-1.05 0.15-0.35 0.25-0.45 ≤0.025 ≤0.015 1.35-1.60 ≤0.10 100CrMnSi6-4 0.93-1.05 0.45-0.75 1.00-1.20 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMnSi6-6 0.93-1.05 0.45-0.75 1.40-1.70 ≤0.025 ≤0.015 1.40-1.65 ≤0.10 100CrMo7 0.93-1.05 0.15-0.45 0.25-0.45 ≤0.025 ≤0.015 1.65-1.95 0.15-0.30 Delivery
βαριά σωλήνωση χάλυβα τοίχων 1010 1020 1045 για τον υδραυλικό κύλινδρο πετρελαίου εγχύσεων καυσίμων
Fuel Injection High Pressure Oil Hydraulic Cylinder Seamless Steel Tube China Precision Steel Tube leading supplier, choose the high quality Hydraulic Precision Steel Tube, Precision Carbon Steel Tube, Precision Seamless Steel Tube, CDS Steel Tube, CDW Steel Tube Wall thickness 4-50mm Diameter 16.5-350mm Length 5-6m Upon request Application :Diesel(compression-ignition)engines Produce method: shall be manufactured from unalloyed quality steel or an equivalent steel produced
JIS G 3445 STKM 11A Χωρίς συγκόλληση σωλήνες CS για μηχανικές κατασκευές
JIS G 3445 STKM 11A Seamless CS pipes OD13mm x WT3.2mm,OD 8mm x ID5.1mm for Hyundai, Maruthi, Nissan, Caterpiller etc 1. Standard: JIS G3445 Standard STKM 11A high precision seamless steel tube 2. Steel Grade: STKM11A STKM12A STKM12B STKM12C STKM13A STKM13B STKM13C STKM14A STKM14B STKM14C STKM15A STKM15C STKM16A STKM16C STKM17A STKM17C STKM18A STKM18B STKM18C STKM19A STKM19C STKM20A 3. Production method: Cold drawing on the seamless steel tubes, to reach high accuracy on the
Ειδικός incoloy 600 601 UNS N06600 νικελίου capillar σωλήνας κραμάτων σωλήνων κραμάτων
Special nickel alloy incoloy 600 601 UNS N06600 tube alloy capillar tube Applications: For fluid and gas transport Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Inconel 601 Size range: O.D. 3.18-101.6mm W.T. 0.5-20mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Form ASTM Rod, bar and wire B 166 Plate, sheet and strip
ASME TP316 12X1 λεπταίνει τη σωλήνωση ανοξείδωτου τοίχων
ASME TP316 12X1 Annealed and Pickled Thin Wall Stainless Steel Tubing Torich is a manufacturer and trader for Annealed and Pickled Thin Wall Stainless Steel Tubing, with grade TP304/304L, TP316/316L, the products are exported to over 30 countries worldwide. Size:ANSI /ASME size is under,other standard of size is for ready choice O.D.:0.23'to 48'(5.8-1219mm) W.T.:0.04'to 2'(1.0-50.8mm) Length:Max.18 Meter NPS 1/8'-48' Schedule:5/5S,10/10S,20/20S,40/40S,80/80S,120/120S,160/160S
ASTM A908 304 Αυστενίτικος σωλήνας βελόνων από ανοξείδωτο χάλυβα
ASTM A908 304 304L 316 316L Stainless Steel Tube: Austenitic Stainless Steel Needle Tubing for Industry Austenitic stainless steel needle tubing is widely used in various industrial applications due to its excellent corrosion resistance, high strength, and good formability. The ASTM A908 specification covers the requirements for stainless steel tubes made from grades 304, 304L, 316, and 316L. This article delves into the material specifications, key features, chemical
SAE J525 ERW/DOM Ζυγισμένοι σωλήνες από χάλυβα χαμηλού άνθρακα, με έλαση για κάμψη και καύση στη βιομηχανία αυτοκινήτων
SAE J525 ERW / DOM Welded Steel Tube Low Carbon Annealed For Automotive Industry SAE J525 ERW/DOM Welded Low-Carbon Annealed Steel Tube for Automotive Hydraulic Lines SAE J525 ERW/DOM welded steel tube is a normalized, cold-drawn, single-wall low-carbon steel pressure tube designed for automotive fluid-line parts requiring bending, flaring, forming, and brazing. It is a practical choice when the drawing requires tight OD/ID control, good concentricity, a smooth surface, and
Τραβηγμένος στο κρύο ενωμένος στενά σωλήνας Astm A513 1020 χάλυβα άνθρακα για το αυτοκίνητο/τα μηχανήματα
ASTM A513 1020 Carbon Steel Cold Drawn Welded Tube ASTM A513 1020 Carbon Steel Cold Drawn Welded Tube The cold drawn welded tube is produced by drawing ERW (electric resistance welded tube) through a die and over a mandrel plug. During this process the sizing (wall thickness, inside and outside diameter), as well as weld integrity and surface finish is closely controlled to produce tube of the required size and mechanical property characteristics. Product NameCarbon steel
Τραβηγμένος στο κρύο/cold-rolled ο άνευ ραφής σωλήνας 34CrMo4 42CrMo4 42CrMo χάλυβα κραμάτων
34CrMo4 42CrMo4 42CrMo Seamless Cold Drawn/Cold Rolled steel tube 34CrMo4: C: 0.30-0.37 Si: 0.40 Mn: 0.40-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo4: C: 0.38-0.45 Si: 0.40 Mn: 0.60-0.90 P: 0.035 S: 0.035 Cr: 0.90-1.20 Mo: 0.15-0.30 42CrMo: C: 0.38-0.45 Si: 0.17-0.37 Mn: 0.50-0.80 Cr: 0.90-1.20 Mo: 0.15-0.25 Main Characteristics: No Oxidation Layer on the Outer and Inner Walls No Crack under Flaring and Flattening No Leakage under High Pressure No Distortion
