precision seamless pipe
"
DIN 17177 St37.8 Ηλεκτρική αντίσταση συγκολλημένος σωλήνας χάλυβα Ηλεκτρικός σωλήνας πίεσης για αυξημένες θερμοκρασίες
DIN 17177 St37.8 St42.8 15Mo3 Electric Resistance Welded Steel Pipe Electric Pressure Pipe For Elevated Temperatures Material DIN 17177 is a standard that specifies the requirements for electric resistance welded (ERW) steel pipes used for elevated temperature applications. The pipes are designed to withstand high pressures and temperatures, making them suitable for various industrial applications. Specification The standard outlines the specifications for the manufacturing
Αντιοξειδωτικό τραβηγμένο στο κρύο πάχος 30mm σωλήνας χάλυβα ακρίβειας
PRECISION CARBON STEEL TUBE Product nam EN10305 round hollow seamless mechanical cold drawn steel tube Steel Grade 45#,20#,16Mn,27SiMn, ST-52,,no-alloy steel specifications O.D.:40-325mm(H7-H9) ,W.T.:3-30mm, L:fixed or random(1-10m) Straightness 0.5 /1000 Roughness(Ra) 0.2 to 0.4micron Processing Type cold drawn, honed Marking JW, ID, OD Package banding with steel strips, braiding parcel at outside Conservation Anti rust oiled coating on the inside and outside of the surface,
Ανοξείδωτη κουλουριασμένη σωλήνας σωλήνωση αερίου ελαίου 2507 A789 UNS S31803 έξοχη διπλή
A789 UNS S31803 Super Duplex 2507 Oil Gas Stainless Pipe Coiled Tubing Manufacture: Pipes shall be made by the seamless process and shall be either hot finished or cold finished. Application: high pressure pipe line, heat exchanger(chemical processing industry), oil and gas pipeline Size Range: OD:21.3-711mm WT: SCH5/SCH10/SCH40/SCH80/SCH160/XXS(1.65mm-30.75mm) Length: max 12000mm Superior Surface Finish: The traditional annealing: Open furnace---Oxygen atmosphere---form
Διπλός σωλήνας ανοξείδωτου 2205
2205 Duplex Stainless Steel Pipe Manufacture: Pipes shall be made by the seamless process and shall be either hot finished or cold finished. Superior Surface Finish: The traditional annealing: Open furnace---Oxygen atmosphere---form Scale, tarnish the material, For more than 12m tubes this method is hard to clean inner surface. A special bright annealing: Closed furnace---Intert atmosphere use noble gases(Nitrogen and argon) Preventing Oxygen to contact with material--
έξοχοι διπλοί ανοξείδωτοι σωλήνες χάλυβα προμηθευτών astm a789 uns s31803 σωλήνων
super duplex pipe suppliers astm a789 uns s31803 steel pipes Applications: For chemical , boiler industry, construction Technique: Cold worked and hot worked Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: Material 200 series: 201, 202 300 series: 304, 304L, 304H, 310S, 316, 316L, 317L, 321,310S,309S,2205,2507,2520 400 series: 410, 410S,420, 430, 431, 440A,904L Size range: O.D. 8-530mm W.T. 0.5mm-30mm Length max 12000mm Characteristic: Good
EN 1123-1 Σωλήνας από γαλβανισμένο χάλυβα S235JR για σωλήνες αποχέτευσης
EN 1123-1 S235JR Hot Dip Galvanized Tube Welded Steel Tube for Sewer Pipes Material The EN 1123-1 S235JR hot dip galvanized tube is a type of welded steel tube specifically designed for sewer applications. The S235JR grade indicates a structural steel with a minimum yield strength of 235 MPa, making it suitable for various construction and engineering applications. Specification The specification for EN 1123-1 outlines the requirements for hot dip galvanized welded steel
Άνευ ραφής σωλήνες χάλυβα ευθύτητας για τη διάτρυση GB/T 9808 37SiMn 38CrMoAl
Good Straightness Seamless Steel Tubes for Drilling GB/T 9808 37SiMn 38CrMoAl Spec:Material:37SiMn 38CrMoAlSize Range:OD:6-95mm WT:1-10mm General Length:4-12m Chemical CompositonCHEMICAL COMPOSITION % maxPS0.0300.030 Tolerance of Outer Diameter and Wall ThicknessStandardProduction MethodTube Size ToleranceGB/T 9808-2008Hot rolledOD(+1.0%D) or +0.65(-0.5%D) -0.35WT≤10(+15%S)or +0.45(-10%S) -0.35>10(+12.5%S, -10%S)Cold Drawn(rolled)OD ±0.50%D or ±0.20WT ±8%S or ±0.15Q(N)/ T118
Ατσάλινα σωλήνα Inconel 600 για σωλήνες διάσπασης διχλωριούχου αιθυλενίου EDC
Inconel 600 steel pipe for ethylene dichloride ( EDC ) cracking tubes Applications: For industry heating elements,home appliances Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: inconel 600 Size range: O.D. 1-600mm W.T. 1.0-18mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Item Chemical Compositio
Σωλήνας 600 κραμάτων νικελίου UNS N06600 inconel για τη χημική επεξεργασία
UNS N06600 nickel alloy inconel 600 pipe for chemical processing Applications: For industry heating elements,home appliances Technique: Cold Drawn Alloy or not: Alloy Secondary or not: Non-Secondary Steel Grade/Steel Material: inconel 600 Size range: O.D. 1-600mm W.T. 1.0-18mm Length max 12000mm Characteristic: Good concentricity Good OD and ID tolerance High Precision Stable quality Smooth Roughness TORICH QUALITY ASSURANCE Chemical Composition: Item Chemical Composition (%)
