seamless steel pipe
"
Ηλεκτρο-γυαλισμένος σωλήνας ακριβείας από ανοξείδωτο χάλυβα 316L EP για εφαρμογές ημιαγωγών
Electropolished 316L Stainless Steel Precision EP Pipe for Semiconductor (UHP) Systems Material This product is a precision stainless steel pipe/tubing made from 316L austenitic stainless steel (low-carbon, Mo-alloyed) and finished by electropolishing (EP) —primarily on the internal wetted surface —to achieve an ultra-smooth, contamination-resistant surface for semiconductor high-purity and ultra-high-purity (HP/UHP) gas and chemical delivery lines. Specifications Grade :
Κοβάλτιο κραμάτων σωλήνων χάλυβα κραμάτων περιβάλλοντος ένδυσης 6B - βασισμένη PED πιστοποίηση
Wear Environment Alloy Steel Pipe Alloy 6B Cobalt - Based PED Certification Alloy Steel Pipe Alloy 6B cobalt-based alloy Alloy 6B is a cobalt-based alloy for wear environment, anti-seizure, anti-wear, anti-friction. It has a low coefficient of friction, which can make sliding contact and other metals and no wear in most cases. Even without lubricant, or cannot use lubricant applications, Alloy 6B minimizes scuffing and wear. Alloy 6 B wear-resisting performance is inherent,
Έξοχο σκληραίνοντας κράμα 41 πτώσης σωλήνων χάλυβα κραμάτων για τα τμήματα μηχανών
Super Alloy Steel Pipe Precipitation Hardening Alloy 41 For Engine Components Alloy Steel Pipe Alloy 41 precipitation hardening Nickel-Base Superalloy Alloy41 is a precipitation hardening Nickel-Base Superalloy, and it has higher tensile and lasting creep strength and good oxidation resistance within the temperature range of 650~950℃. Since the alloy of aluminum, titanium, molybdenum content is high, the ingot blooming is more difficult, but the material after deformation has
Νικέλιο - σωλήνας Incoloy Α χάλυβα υπερκραμάτων βάσεων - σωλήνωση χάλυβα κραμάτων 286 7.94 Γ/εκατ. ³
Alloy Steel Pipe Incoloy A-286 Charactistic of material: Chemical composition: C: ≤0.08 Cr:13.5-16.0 Ni:24.0-27.0 Mo:1.00-1.50 Ti:1.75-2.30 Fe:remaind V:0.10-0.50 B:0.001-0.010 Mn:1.00-2.00 Al ≤0.04 Si:≤1.00 P:≤0.030 S:≤0.020 Fe-25Ni-15Cr base superalloy + molybdenum,titanium,aluminum,Vanadium Physical properties: Density 7.94 g/cm³ 0.287 lb/in³ Melting Point 1430°C 2600°F Coefficient of Expansion 16.4 μm/m °C (20 - 100°C) 9.1 x 10-6 in/in °F (70 - 212°F) Modulus of Rigidity
Ψυχρά επεξεργασμένα αδιάβροχα σωλήνα από αυστενικό ανοξείδωτο χάλυβα για πετροχημικά προϊόντα ASTM A312 / ASME SA312
ASTM A312/ASME SA312 Cold Worked Austenitic Stainless Steel Seamless Pipe For Petroleum And Petrochemicals Introduction ASTM A312/ASME SA312 is a specification for cold-worked austenitic stainless steel seamless pipes that are widely used in the petroleum and petrochemical industries. These pipes are designed to withstand high temperatures, corrosive environments, and extreme pressure conditions. This article aims to provide an overview of the material, specification,
Φερριτικοί σωλήνας χάλυβα κραμάτων χωρίς συγκόλληση/σωλήνας Astm A335
Seamless Ferritic Alloy Steel Pipe ASTM A335 For High Temperature Service Material The material used for seamless ferritic alloy steel pipes ASTM A335 for high temperature service is a specific grade of alloy steel. Specification The specification for seamless ferritic alloy steel pipes ASTM A335 covers various aspects such as dimensions, sizes, and requirements for high temperature service. Chemical Composition The chemical composition of the seamless ferritic alloy steel
Άνθρακα χάλυβα άνευ ραφής σωλήνας DIN 2391 χάλυβα σωλήνων τραβηγμένος στο κρύο για το αυτοκίνητο
Seamless Steel Tube Carbon Steel Seamless Pipes Cold Drawn Steel Tube DIN 2391 For Automobile Table of Contents Material Specification Chemical Composition Mechanical Properties Steel Grade Application Material The seamless steel tubes used for carbon steel seamless pipes, specifically designed for cold drawn applications as per DIN 2391, are fabricated from high-quality carbon steel. This material ensures excellent durability, strength, and corrosion resistance, making it
GB/T 21833 Αυστενίτες, φερριτικοί διπλόξοι σωλήνες και σωλήνες γενικής χρήσης από ανοξείδωτο χάλυβα
GB/T 21833 Austenitic Ferritic Duplex Grade Stainless Steel Seamless Tubes And Pipes For General Purpose Introduction GB/T 21833 is the Chinese national standard that specifies the requirements for austenitic ferritic duplex grade stainless steel seamless tubes and pipes for general-purpose applications. This standard ensures that the material meets specific quality and performance criteria. This article provides essential information about the material, its specifications,
GB/T 31928 Σωλήνες από ανοξείδωτο χάλυβα
GB/T 31928 Stainless Steel Tube: Seamless Stainless Steel Tubes And Pipes For Ship Introduction The GB/T 31928 standard specifies the requirements for seamless stainless steel tubes and pipes used in shipbuilding applications. These tubes and pipes are designed to withstand the demanding conditions found in marine environments, providing superior corrosion resistance, strength, and durability. This article highlights the material, specifications, key features, chemical
