stainless tube steel
"
Εξαγωνικός ειδικός σωλήνας 50mm χάλυβα άνευ ραφής σωλήνωση ανοξείδωτου
Hexagonal Special Steel Pipe 50mm Seamless Stainless Steel Tubing Stainless Seamless Hexagonal Steel Tube, it is made by Stainless Steel, produced by cold drawn, both inside and outside are Hexagonal Shape Sizes: According to Customers' Drawing and Design.
GOST 4543 καλής ποιότητας άνευ ραφής κύκλος σωλήνων χάλυβα κραμάτων για την επιτροπή τοίχων νερού
GOST 4543 Alloy Pipe for Water Wall Pannel This pipe follow the GOST4543 which is for alloyed construction hot-rolled and forged gauged steel with diameter or thickness up to 250mm, and steel with a special surface finish, used in a thermally treated condition and produced in the form of bars, strips and hanks. The mass fraction of phosphorus, sulfur, residual copper, nickel and chromium in steel of all grades shall not exceed the standards specified in table.Category of
En10217-1 ενωμένος στενά σωλήνας χάλυβα P195TR1 υψηλή συχνότητα για λόγους πίεσης
Welded Steel Tubes EN10217-1 P195TR1 P235TR1 P265TR1 for Pressure Purposes EN10217-1 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties Since 2nd century, the welding seam quality increased a lot with fast development of excellent quality steel coil production, welding technology and inspection technology improvement, more welding steel tube sizes are available, and gradually
Το στρογγυλό EN 10217-2 ένωσε στενά τους σωλήνες P195GH P235GH P265GH 16Mo3 HFW SAWH SAWL χάλυβα
EN10217-2 Welded Steel Tubes P195GH P235GH P265GH 16Mo3 HFW SAWH SAWL EN10217-2 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH
Το καταβυθιζόμενο βολταϊκό τόξο P235GH P265GH 16Mo3 ένωσε στενά τη σωλήνωση χάλυβα με μη - χάλυβας συμμάχων/κραμάτων
EN10217-5 P235GH P265GH 16Mo3 Submerged Arc Welded Steel Tubes with Non-ally and Alloy Steel EN10217-5 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded -
EN 10217-4 σωλήνες χάλυβα άνθρακα 195TR1 P235TR1 ενωμένοι στενά P265TR1 για λόγους πίεσης
EN10217-4 Welded Steel Tubes for Pressure Purposes EN10217-4 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL Welding
Το EN καταβυθιζόμενο βολταϊκό τόξο 10217-6 που ενώνεται στενά διοχετεύει με σωλήνες τους μη συμμαχικούς σωλήνες χάλυβα με το χάλυβα άνθρακα
EN10217-6 Submerged arc welded non-alloy steel tubes EN10217-6 Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties Material: Fully killed steel, Fine grain steel with a ferritic grain size. Steel Names: In accordance with EN10027-1 and CR10260 Manufacture: HFW High frequency welded SAW Submerged arc welded - longiditudinal seam - SAWH - helical seam - SAWL
TORICH Dia 41200mm σωλήνες ανοξείδωτου 316/316L ένωσε στενά το σωλήνα χάλυβα για υγρό GB/T 12771
TORICH Diameter 4-1200mm Welded 316 / 316L Stainless Steel Pipes for Liquid GB/T 12771 SPEC: Material:304/304L 316/316L Diameter : 4-1200mm Wall thickness : 0.3-200mm Length : 2-12m Upon customer's request Tolerance: According to the following tables or customers’ request. Table 1 Tolerance of OD Classification D Permissible Tolerance A B H All Dimensions ±0.5% or ±0.20 ±0.75% or ±0.30 T ＜40 ±0.20 ±0.30 ≥40~＜65 ±0.30 ±0.40 ≥65~＜90 ±0.40 ±0.50 ≥90~＜168.3 ±0.80 ±1.00 ≥168.3~
Σωλήνωση ανοξείδωτου φερριτικής/ακρίβειας Martenstic για τον ανταλλάκτη θερμότητας
ASTM A268 Seamless and Welded Ferritic and Martenstic Stainless Steel Tubing for General Service Brand : TORICH Standard: ASTM A268 O.D: 12.7-203mm Normal W.T : 5.1mm Application : For boiler and heat-exchange Tolerance of Size Group Size,O.D in(mm) Permissible Variations in O.D in (mm) 1 up to1/2(12.7) ,excl +/- 0.005(0.13) 1/2 to 1,1/2(12.7 to38.1),excl +/- 0.005(0.13) 2 1,1/2 to 3,1/2 (38.1 to 88.9) excl +/- 0.01 (0.25) 3 3,1/2 to 5,1/2(88.9 to 139.7) excl +/-0.015(0.38) 4
