steel mechanical tubing
"
Στρογγυλός χωρίς συγκόλληση καυτός διαμορφωμένος σωλήνας δομικού χάλυβα 10, 20, 35, 45, 10Mn2, 15Cr, 20Cr
GOST 8732-78 10 , 20 , 35 , 45 , Seamless Hot-Formed Steel Pipes , Structural Steel Pipe, Structural Steel Tube GOST 8732-78. Seamless Hot-Formed Steel Pipes Outside Diameter: 32 – 219 mm (32; 33,7; 38; 42; 42,4; 45; 48,3; 50; 51; 54; 57; 60; 60.3*; 63,5; 68; 70; 73; 76; 82,5*; 83; 89; 95; 102; 108; 114; 121; 127; 133; 140; 146; 152; 159; 168; 178*; 180; 194; 203; 219) Wall Thickness: 2.8 – 46 mm (2,8; 3; 3,2*; 3,5; 4; 4,5; 5; 5,5; 6; 6,5; 7; 7,5; 8; 8,5; 9; 9,5; 10; 11; 12;
Μηχανικός εργασμένος κρύο χάλυβας κραμάτων ανοπτημένο σωλήνες AISI4130 AISI4140
Alloy steel 4130 4140 for ASTM A519 seamless steel tubes ASTM A519 SEAMLESS STEEL TUBES, by DOM production, with the steel grade of SAE4140 and SAE4130, other alloy steel grade upon customer's agreement.: SAE4130: C: 0.28-0.33% Mn: 0.40-0.60% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% SAE4140: C: 0.38-0.43% Mn: 0.75-1.00% P max 0.40% S max 0.40% Si: 0.15-0.35% Cr: 0.80-1.10% Mo: 0.15-0.25% Sizing Method: 1. HF- hot finished 2.CW-cold worked Themal
Άνευ ραφής σωλήνας UNS N08925 ανοξείδωτου κραμάτων νικελίου ASTM B677 UNS N8904
Seamless, Cold-worked or Hot-finished pipe and tube intended for general corrosive service. Steel Grade: UNS N08904,UNS N08925,and UNS N08926 Materials and Manufacture: The material is supplied in the solution-treated condition Tests: Chemical Analysis - One test per lot Machanical Properties - One test per lot Non-destructive Test - Each Piece in each lot Average Diameter: The average if the maximum and minimum outside diameters as determined at any one cross section of the
Άνευ ραφής ειδικός χάλυβας προσαρμοσμένο σωλήνας Lengyh με τον άνθρακα Sae1010 Sae1020
Seamless Alloy Steel Tube Special Steel Pipe With Carbon SAE1010, SAE1020 Steel Grade: ST35.8, ST37.0, ST44, ST52; E155, E195, E215, E235, E275, E355; 195GH, P235GH, P265GH, P195TR1, P195TR2, P235TR1, P235TR2, P265TR1, P265TR2; SAE1010, SAE1020, SAE1036, SAE1035, SAE1045; Carbon steel tube: SA178, A179, A192, A210, SA213, SA214, etc. Other steel grade would be available, please advise and check with our sales. Size range: O.D.: 12.7-177.8mm W.T.: 1-25.4mm L: according to
Χωρίς συγκόλληση σωλήνας ASTM A209 χάλυβα κραμάτων T1 T1a T1b για το λέβητα και Superheater
ASTM A209 T1 T1a T1b Seamless Alloy Steel Tubes For Boiler and Superheater Size range: O.D.: 6-420mm W.T.:1-50mm L: according to customer requirement Steel Grade and Chemical Compositions: Element T1 T1a T1b Carbon 0.10-0.20 0.15-0.25 0.14max Manganese 0.30-0.80 0.30-0.80 0.30-0.80 Phosphorus 0.025 0.025 0.025 Sulfur max 0.025 0.025 0.025 Silicon 0.10-0.50 0.10-0.50 0.10-0.50 Molybdenum 0.44-0.65 0.44-0.65 0.44-0.65 Mechanical Properties: Element T1 T1a T1b Tensile strength
ASTM A213 άνευ ραφής ανοξείδωτου ανταλλάκτης θερμότητας σωλήνων σε σχήμα υ
ASTM A213 Seamless Stainless Heat Exchanger U Shaped Tube Size Range: OD:6-127mm, WT:0.5-12mm, Length: max12000mm Material: Grade: T12 TP304 TP304L TP316 TP316L TP317 TP317L TP321 Manufacture: Tubes shall be made by the seamless process and shall be either hot finished or cold finished. SA213 long steel tubes, make to U bend tubes for boilers and heat exchangers. Heater tubes U TUBES with Stainless, Alloy steel grade available, Carbon Steel grade is also available. Mechanical
Χωρίς συγκόλληση σωλήνας ASTM B135 χάλυβα κραμάτων C27000 C27200 H58 για τη στρατιωτική βιομηχανία
Products Description TORICH ASTM B135 C27000 C27200 H58 Seamless Brass Round TubeStandardASTM B135 Standard Specification for SeamlessBrassTubeMaterialC27000 C27200SizeWT: 0.2-120mm; OD: 2-914mm; Length: 2m,4m,5.8m,6m,12m or per customer’s requestSurfaceMill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required.ManufacturerPipes shall be made by the seamless process.ApplicationsResidential housing water pipes, heating, cooling pipes installed aviation,
2 σωλήνας ανοξείδωτου ίντσας για τους ανταλλάκτες θερμότητας/τους συμπυκνωτές 304 316
2 inch stainless steel tubing for Heat Exchangers / Condensers 304 316 Grade: UNS N02200, UNS N02201 Production: Cold worked, Hot worked Size range: O.D.:6-127mm W.T.:1-30mm L: according to Customer requirement TABLE 2 Chemical Requirements Chemical Compostion Composition, % Element Nicel (UNS N02200) Low-Carbon Nickel (UNS N02201) Ni,A min 99.00 99.00 Cu 0.25 0.25 Fe 0.40 0.40 Mn, max 0.35 0.35 C,max 0.15 0.02 Si,max 0.35 0.35 S,max 0.01 0.01 Delivery Conditions: Symbols
3 ανοπτημένα πρότυπα επιφάνειας DIN 2605 ανοξείδωτου σωλήνων ανοξείδωτου συγκόλλησης τρόπων αγκώνας
Din 2605 SS304 316L 180 90 Degree Short Radius 8 6 4 Inch Reducing Fittings 3 Way Weld Pipe Tube Stainless Steel Elbow Size: seamless 1/2'~12' (DN15-DN600) welded 1/2'~12' (DN15~DN1200) Standard: ASME B16.9 ; DIN2605 ; JIS Thickness: SCH5S-SCH160 Material: 317/L ; 304/L;316/L;310/S;309/S;347/H;321/321/H;904/L Applications: Dairy, food, beer, beverage, pharmacy, cosmetic, etc DN NPS OD Center to End Center to Center 25 1 32 33.4 25 50 32 1 1/4 38 42.2 32 64 40 1 45 48.3 38 76
