bending steel pipe
"
ASME B16.9 10» ομόκεντρος μειωτής άνευ ραφής DN6 DN100 συγκόλλησης άκρης
ASME B16.9 Concentric Reducer Standard ASME B16.9 wraps in several parameters that act as a guideline for the manufacturer of wrought factory-made buttwelding fittings such as elbows, tees, reducers including the Carbon Steel Concentric Reducer etc. The fittings need to conform to the values of the following parameters i.e. overall concentric pipe reducer dimensions, ratings, testing, tolerances, and markings. Depending on the buyer, these reducers are made available between
Περασμένος κλωστή TA2 σωλήνας πτερυγίων θερμαντικών σωμάτων τιτανίου JIS πρότυπα
High Efficiency TA2 Titanium Tube Evaporator Internal And External Thread Fin Tube Specification range: Φ( 8.0-38.0)mm Χ Τ ( 0.5-2.0)mm Shape: Fin, Pockmarked Surface, Spiral sheet, Point (surface and tube bore) Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) austenitic stainless steel pipe SUS304, SUS316L, 321, 904L, etc Ferritic stainless steel pipe 409,409L,439L,SUS445J2 Duplex stainless
Περασμένος κλωστή άνευ ραφής σωλήνας τιτανίου TA2 για τον εξατμιστήρα
Evaporator Internal And External Thread Fin High Efficiency TA2 Titanium Tube Specification range: Φ( 8.0-38.0)mm Χ Τ ( 0.5-2.0)mm Shape: Fin, Pockmarked Surface, Spiral sheet, Point (surface and tube bore) Material grade: Titanium and titanium alloy tubes (TA1, TA2, TA3, ta8, ta8-1, ta9, ta9-1, TA10, gr.1, gr.2, gr.7, gr.12, gr.16, etc.) austenitic stainless steel pipe SUS304, SUS316L, 321, 904L, etc Ferritic stainless steel pipe 409,409L,439L,SUS445J2 Duplex stainless
Υψηλή ακρίβεια DIN 2391 24mm τραβηγμένος στο κρύο άνευ ραφής σωλήνας
24mm high precision seamless steel small tube Torich the steel tubes maker. Key words :Hydraulic cyliner tubes,DIN2391 steel tubes ST37 ST35 St37.4 St52 E235 E255 E355 etc material is avaliable. Delivery condition:BK(+C),BKS(+SR),BKW(+LC),GBK(+A),NBK(+N). Spec: OD4-114.3mm WT0.5-15mm Pls feel free contact if any special requests on material and sizes. Production method:Quality carbon steel--Cold drawing--Bright heat treatment without oxidization (NBK status)--nondestructive
Επικάλυπτος σωλήνας τύπου L με φτερούγες άνθρακα τύπου LL με φτερούγες ελικοειδούς έλξης και υψηλή θερμική αγωγιμότητα για ανταλλακτές θερμότητας
Overlapped L Type Fin Tube Carbon LL Type Finned Tube for Heat Exchanger Product Overview Overlapped L type fin tube, also called LL type finned tube or LL-foot fin tube, is a tension-wound finned tube where L-shaped fins are helically wrapped around a carbon steel base tube and each fin foot overlaps the previous one. This creates a double “L” foot that completely jackets the outer surface of the tube. For carbon LL type fin tubes, the base tube is typically seamless low- or
Έξοχη διπλή ανοξείδωτη κουλουριασμένη σωλήνωση αερίου ελαίου 2507
Super Duplex 2507 Oil Gas Stainless Coiled Tubing D:6-127mm WT:0.5-12mm Grade: 304 316 317 etc 1.4410 / 2507 / S32750 duplex Stainless Steel U bend Tube / U be SA213 long steel tubes, make to U bend tubes for boilers and heat exchangers. With strong wood structure box packing by containers loading and shipping. Heater tubes U TUBES with Stainless, Alloy steel grade available, Carbon Steel grade is also available. Chemical Composition C max Mnmax Simax Smax Pmax Cr Ni Mo Cumax
Άνευ ραφής σωλήνες λεβήτων Torich ASTM A556 GR A2 B2 C2
Torich ASTM A556 Seamless Cold Drawn Seamless Boiler Pipe This standard is issued under the fixed designation A556/A556M；the number immediately following the designation indicate the year of original adoption or,in the case of revision,the year of last revision. A number in parentheses indicates the year of last reapproval.A superscript epsilon indicates an editorial change since the last revision or reapproval. Reference documents:A450/A450M Specification for General
Λαδωμένος ψευδάργυρος φλαντζών προσώπου επεξεργασίας ASME B16.5 επίπεδος που καλύπτεται
ASME B16.5 Flat Face Flange Applications that require the use of flat face flanges are frequently those systems where the mating flanges or flanged fitting is produced from a casting. The ANSI B16.5 standard is limited to those flanges and their corresponding fittings which are generally made from cast or forged materials. An ASME B16.5 Flat Face Flange has a gasket surface in the same plane as the bolting circle face. The ANSI B16.5 Flat Face Flange Standards also includes
