electric resistance welded pipe
"
Bs6323-6 σωλήνες χάλυβα DOM που επεξεργάζονται στη μηχανή, άνευ ραφής ενωμένοι στενά σωλήνες χάλυβα πάχους τοίχων 35mm
Standard: BS6323-6 Seamless and Welded Steel Tubes for Automobile,Mechanical and General Engineering Purposes Part 6: Specific requirements for cold finished electric resistance welded(including induction welded) steel tubes Applications: for Auto industry / for machinery use/mechanical and general engineering purposes Size range: O.D.:6-350mm W.T.:1-35mm L:max12000mm Method of Manufacture: The tubes are manufactured from flat rolled strip, longintudinally welded continuously
Σιδηροδρομικά σωλήνα ERW για συνηθισμένους σωλήνες με γαλβανισμένη επιφάνεια και 30-325 mm OD
SGP Welded Carbon Steel Pipe (ERW Steel Tube) for Ordinary Piping Material This product is an electric-resistance-welded (ERW) carbon steel pipe designed for ordinary/utility piping —typically used to convey steam, water, oil, gas, air, and other general fluids under relatively low service pressure . Specifications Manufacturing process: High-frequency ERW longitudinal seam. Typical size range (SGP / JIS ordinary piping): OD 10.5–508.0 mm (DN 6A–500A) with corresponding
Q235 Διάμετρος σωλήνας από δομικό χάλυβα άνθρακα συγκολλημένος για αρχιτεκτονικές εφαρμογές με επιλογές ψυχρής έλξης και θερμής έλασης
Q235 Carbon Structural Steel Welded Square Pipe for Architecture Material Q235 is a mild (low-carbon) structural steel widely specified in China under GB/T 700 . It is commonly produced into welded square hollow sections (SHS) for building and architectural steelwork because it balances strength, weldability, formability, and cost efficiency . Specifications Typical supply options for carbon steel welded square pipe (SHS) : Manufacturing : ERW (Electric Resistance Welded),
ASTM A500 Grade C Κρύο σχηματισμένο συγκολλημένο δομικό τετραγωνικό σωλήνα από χάλυβα άνθρακα με αντοχή 50 ksi
ASTM A500 Grade C Cold-Formed Welded Carbon Steel Structural Square Tubing Material ASTM A500 Grade C is a cold-formed, electric-resistance-welded (ERW) carbon steel structural hollow section (HSS) in a square profile, designed for welded, riveted, or bolted construction (e.g., bridges, buildings, and general structural fabrication). Specifications Product form: Square structural tubing (HSS) Manufacturing: ERW from flat-rolled steel; welded across thickness. (Inside flash is
Σιδηροδρομικά σωλήνα DOM ERW Στρογγυλό σωλήνα για μηχανήματα ακριβείας
DOM Steel Pipe (ERW Cold Drawn Mild Steel Round Tube) for Precision Machinery 1. Material This product—commonly referred to as DOM (Drawn Over Mandrel) tubing —is a high-strength, precision round tube manufactured using a combination of electric resistance welding (ERW) and cold drawing over a mandrel. It’s typically fabricated from mild carbon steel grades such as SAE 1020, 1026 , and in some cases ST52.3 . 2. Specifications Manufacturing Process : Starts with an ERW "mother
JIS G3472 STAM500G High Strength ERW Welded Steel Tube with Good Formability and Consistent Dimensions for Automotive Structural Pipe
Electric-Resistance Welded Carbon Steel Structural Pipe for Automotive Applications Material This product is an electric-resistance welded (ERW) carbon steel tube manufactured from hot-rolled or cold-rolled steel strip/coil and welded continuously. It is designed specifically for automotive structural applications, meeting the Japanese standard JIS G3472 for “Electric Resistance Welded Carbon Steel Tubes for Automobile” (automotive structural use).The material is carbon steel
S31260 Σωλήνας από ανοξείδωτο χάλυβα διπλής όψης - Διάλυμα υψηλής αντοχής ανθεκτικό στη διάβρωση χλωριούχου ανόπτησης για μεταφορά υγρού αερίου
S31260 Industry Seamless Welded Stainless Steel Tube For Fluid Gas Transport S31260 Seamless and Welded Duplex Stainless Steel Tube UNS S31260 is a 25Cr duplex stainless steel tube grade designed for industrial fluid and gas transport where higher strength, chloride corrosion resistance, and stress corrosion cracking resistance are required. Compared with standard 304/316 austenitic stainless steel tubing, S31260 offers a stronger duplex microstructure and higher resistance
EN 10217-4 P215NL Ελυσσμένοι ηλεκτρικοί σωλήνες από μη κραματοποιημένο χάλυβα για χαμηλές θερμοκρασίες
EN 10217-4 P215NL P265NL Welded Steel Tube: ERW Electric Welded Non-Alloy Steel Tubes For Low Temperature Properties Introduction EN 10217-4 is a European standard that specifies the technical delivery conditions for electric welded non-alloy steel tubes for low temperature properties. This standard covers the requirements for tubes made from non-alloy and fine grain steel suitable for low temperature service. In this article, we will explore the key features, chemical
Χάλυβα από ανοξείδωτο χάλυβα με σχήμα U TP304/304L TP316/316L TP321 για εφαρμογές με εναλλάκτη θερμότητας
Stainless Steel U Shape Pipe – Cold-Bent U-Shaped Steel Pipe for Heat Exchangers Material Overview Stainless Steel U Shape Pipes (U-bent tubes) are fabricated by cold bending seamless or welded stainless steel heat exchanger tubes into precise U or multi-U geometries, followed by stress-relief or solution annealing where required. They are designed for shell-and-tube heat exchangers, condensers, boilers, and feedwater heaters operating under high temperature and pressure, and
