high carbon steel tube
"
16MnDG 10MnDG 09DG GB/T 18984 διοχέτευση με σωλήνες υπηρεσιών χαμηλής θερμοκρασίας σωλήνων ανταλλακτών θερμότητας χάλυβα άνθρακα
GB/T 18984 Seamless Steel Tubes for Low-Temperature Service Piping Spec: Material:16MnDG , 10MnDG , 09DG Size Range:OD:4-1200mm WT:0.3-200mm General Length:4-12m Tolerance: According to the following tables or customers’ request. Permissible deviation tolerance of OD and WT Classfication Steel size Permissible tolerance W-H OD ＜351 ±1.0%D ≥351 ±1.25%D WT ≤25 ±12.5%S W-C OD ≤30 ±0.20 ＞30~50 ±0.30 ＞50 ±0.75%D WT ≤3 ＋12.5%S -10%S ＞3 ±10%S Steel grade and chemical composition
Σωλήνας υψηλού χάλυβα TORICH GB/T3093 Q345 για τη μηχανή diesel
TORICH GB/T3093 Q345 High-Pressure Seamless Steel Tubes For Diesel Engine size:OD:6-530mm WT:0.5-38.1mm Length:1.5-6m Steel Grade And Chemical component Unified digital code Grade Chemical Component(Quality Fraction)/% C Si Mn P S Cr Ni Cu No More Than U20103 10A 0.07~0.13 0.17~0.37 0.35~0.65 0.030 0.030 0.15 0.30 0.20 U20203 20A 0.17~0.23 0.17~0.37 0.35~0.65 0.030 0.030 0.25 0.30 0.20 L03451 Q345A ≤0.20 ≤0.55 1.00~1.60 0.030 0.030 0.30 0.30 0.20 The tolerance of OD and WT
Σωλήνες ανταλλακτών θερμότητας χάλυβα άνθρακα με τον άνευ ραφής άνθρακα - κράμα μολυβδαίνιου - χάλυβας
ASTM A209/A209M Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Carbon Steel Heat Exchanger Tubes Standard: ASTM A209 / A209M Seamless Carbon-Molybdenum Alloy-Steel Boiler and Super heater Tubes,Cold drawn and hot rolled seamless steel tubes for Boiler and Super heater Applications: Boiler, Heat Exchanger, Cold Condensers Size Range: OD:12.7-127mm WT:0.9-12.7mm Steel Grade: T1, T1a, T1b Manufacture: Killed steel material. The tubes are made by seamless process
Ενωμένος στενά en10305-2 τραβηγμένους στο κρύο σωλήνες Q345 χάλυβα άνθρακα για την αυτόματη ψύξη
Welded Cold Drawn Carbon Steel Tubes EN10305-2 For Auto Refrigeration Material The material used for the welded cold drawn carbon steel tubes conforming to EN10305-2 for auto refrigeration is carbon steel. Specification The specification for the welded cold drawn carbon steel tubes EN10305-2 for auto refrigeration is as follows: Standard: EN10305-2 Type: Welded Shape: Round Size Range: Customizable Length: Customizable Chemical Composition The chemical composition of the
Ηλεκτρικοί ενωμένοι στενά αντίσταση σωλήνες ASTM A178/SA178 ανταλλακτών θερμότητας χάλυβα άνθρακα
ASTM A178/ SA178 Electric Resistance Welded Carbon Steel And Carbon Manganese Steel Boiler And Superheater Tubes Material: Carbon steel and carbon manganese steel Production: Electric Resistance Welding Size range: O.D.: 12.7-127mm W.T.:0.9-9.1mm L: according to customer requirement Applications: For Boilers, Superheaters, Heat-Exchangers, Condensers, Boiler flues, Superheater flues and e ends Heat treatment: After welding, all tubes are heat treated at a temperature of
Άνευ ραφής τραβηγμένοι στο κρύο σωλήνες ανταλλακτών θερμότητας χάλυβα άνθρακα υψηλών λεβήτων ASTM A192
ASTM A192 Seamless carbon steel boiler tubes for high pressure service Seamless Carbon Steel Boiler Tubes for High-Pressure Service Minimum-Wall-Thickness ASTM A192 Seamless Cold Drawn High Pressure Boilers Carbon Steel Heat Exchanger Tubes Applications: for Boilers,Superheaters, Heat-Exchangers, High-pressure Boilers, Steam Boilers Cold Condensers and High-Pressure Services, High-Temperature Services for Boiler Constructions Size range: O.D.:12.7-168mm W.T.: 1.0-15mm L:
Μήκος σωλήνων 1000-1200 χιλ. ανταλλακτών θερμότητας χάλυβα άνθρακα TORICH ASTM A214 ERW
Products Description TORICH ASTM A214 ERW Carbon Steel Heat-Exchanger and Condenser Tubes Standard ASTM A214, A450 Matrial Q195, Q215, Q235 etc Carbon Steel Size OD: 6.76.2mm WT: 1-20mm Length: 1-12m Manufacture Tubes are made by electric-resistance welding. Surface Condition The finished tubes are free of scale., slight amount of oxidation is not considered as scale Hardness Requirements The tubes shall have a hardness number not exceeding 72HRB. Thermal Treatment: After
Η ενωμένη στενά J356 λάμψη της SAE έλεγξε τη σωλήνωση 15.88mm OD χάλυβα χαμηλού άνθρακα
15.88 mm OD X 1.24 mm Type -A J356 Welded Flash-Controlled Low-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading This SAE Standard covers normalized electric-resistance welded flash-controlled single-wall low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, flaring, beading, and brazing. Material produced to this specification is not intended to be used for
ASTM σωλήνες 179 άνθρακα χάλυβα θερμότητας ανταλλακτών για τα μέρη ανταλλακτών δοχείων ψύξης/στεγνωτήρων/θερμότητας
Fin Tube Type and Material No. Fin Type Fin Material Tube Material 1 Extruded Fin Fin Tube SB209 - B209 Aluminium Alloy 1050 or 1060 SB75 - B75 Copper SA179 - A179 Carbon Steel SA213 - A213 Stainless Steel SB75 - B75 Copper SB111 - B111 Copper Alloy 2 G Fin Fin Tube / Embeded Fin Tube EN573-3 Aluminium Alloy 1050 or 1060 SB152 - B152 Copper 3 L Fin Fin Tube 4 LL Fin Fin Tube 5 KL Fin Fin Tube Fin Tube Details Tube O.D 8-51mm Wall Thickness Please advice Length Usually ≤12mtr
